Can I connect multiple routers for better Wi-Fi coverage?

Yes, you can!
If your Wi-Fi signal is weak in some parts of your home or office, you can connect multiple routers to your Mahek Broadband connection to extend coverage, improve speed stability, and reduce dead zones.

This setup is known as a Wi-Fi extension or mesh network, and it’s a great solution for large spaces, multi-floor houses, or areas with thick walls.

⚙️ 1️⃣ Ways to Connect Multiple Routers

🔹 Option 1: LAN to LAN (Access Point Mode)

• Use an Ethernet (LAN) cable to connect the main router (connected to Mahek ONT) and the secondary router.
• Disable DHCP on the secondary router.
• Give it the same SSID and password as the main Wi-Fi (optional).

✅ Best For: Seamless Wi-Fi experience across large homes.
⚡ Advantages: Stable speed, low interference, automatic handover between routers.

🔹 Option 2: LAN to WAN (Separate Network)

• Connect your second router’s WAN port to the first router’s LAN port.
• Keep different Wi-Fi names (e.g., Mahek_Main & Mahek_Ext).

✅ Best For: Offices or shared houses needing separate networks.
⚡ Advantages: Each router handles its own bandwidth and IP pool.
⚠️ Note: Double NAT can slightly affect gaming latency.

🔹 Option 3: Wireless Repeater / Range Extender

• Use a Wi-Fi extender or router with repeater mode to amplify existing Wi-Fi signals.
• No cables needed — just configure it near the edge of your main router’s range.

✅ Best For: Areas where cabling isn’t possible.
⚡ Advantages: Easy setup, good for temporary extension.
⚠️ Note: Speed may reduce by 30–50% in repeater mode due to wireless relay.

🔹 Option 4: Wi-Fi Mesh System (Recommended for Large Homes)

• Mesh routers (like TP-Link Deco, Tenda Nova, or Netlink Mesh) create a single Wi-Fi network across your home.
• Devices automatically switch to the nearest node for best speed.

✅ Best For: Multi-floor homes, offices, or large villas.
⚡ Advantages: Zero-drop connectivity, smart roaming, single SSID.
💰 Note: Slightly higher cost, but professional-grade stability.

🧩 2️⃣ Example Setup – LAN to LAN Connection

[Fiber ONT] ➜ [Main Router LAN Port] ➜ [Ethernet Cable] ➜ [Second Router LAN Port]

• Disable DHCP on second router.
• Assign IP (e.g., 192.168.0.2) if main router is 192.168.0.1.
• Keep same SSID & password if you want seamless roaming.

⚙️ 3️⃣ Best Router Models for Multi-Router Setup

All these models are fully compatible with Mahek Broadband’s fiber connections.

🧰 4️⃣ Tips for Best Performance

✅ Use CAT6 LAN cables for wired connections between routers.
✅ Keep each router 15–20 feet apart (if using repeater mode).
✅ Avoid overlapping Wi-Fi channels — set 2.4GHz channels 1, 6, or 11.
✅ Power ON both routers 24×7 for uninterrupted roaming.
✅ For dual-band routers, connect 5GHz for fast devices and 2.4GHz for range.

🧾 Need Help with Configuration?

Our team can help you set up a multi-router or mesh system professionally for best results.

📞 022 697 18061
✉ support@mahekbroadband.in
📍 Shop No. 02, Balkrishna Apt, Musaji Galli Road, Vasai West – 401201

💡 Quick Summary