How can I get full speed on all my devices?

To experience your full Mahek Broadband speed on every device, it’s important to ensure proper Wi-Fi setup, router placement, and device compatibility.
Even though your connection delivers the full plan speed, sharing it across multiple devices can reduce performance if not optimized.

⚙️ 1. Check Your Connection Type

💡 Wired LAN always gives the most accurate and stable speed.

📶 2. Optimize Your Wi-Fi Setup

✅ Place the router in an open, central spot — away from walls and metal surfaces.
✅ Connect high-speed devices (TVs, PCs) to the 5 GHz band.
✅ Reboot your router once a week to clear cache and refresh signals.
✅ Keep the router firmware updated (our team can help remotely).
✅ For large homes, consider adding a Wi-Fi extender or mesh system.

📱 3. Manage Device Load

Every connected device shares the same bandwidth.
To maintain top speed on all devices:

• Disconnect inactive gadgets (old phones, smart speakers, etc.).
• Avoid downloading or streaming 4K videos on multiple devices at once.
• Use parental or QoS controls (if your router supports it) to prioritize speed for important devices.

⚙️ 4. Check Device Capability

Older phones, laptops, or network cards may not support high-speed Wi-Fi standards.
If your plan is 100 Mbps+, ensure your devices support:

• Wi-Fi 5 (802.11ac) or Wi-Fi 6 (802.11ax)
• Gigabit LAN port for wired connections

⚙️ Devices with older Wi-Fi 4 adapters may cap out at 40–50 Mbps even on a fast plan.

🧭 5. Quick Troubleshooting

If speed still seems low:

1. Run a test at mahekbroadband.in/speedtesting.
2. Restart your router and test again via LAN.
3. Ensure only one device is testing at a time.
4. Contact support if your LAN test shows less than your plan speed — our team can remotely optimize your line.

📞 Need Help Getting Full Speed?

📞 +91 022697 18061
✉ support@mahekbroadband.in
🌐 www.mahekbroadband.in